11.17
Installing front fender
11.18
Removing the shock absorber
11.19
Installing the shock absorber
SERVICE WORK ON THE CHASSIS 11
Main work
–
Position front fender.
–
Mount and tighten screws
Guideline
Screw, front fender
–
Mount and tighten screws
Guideline
Screw, front fender
A00138-10
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Detach brake line from the brake line guide.
–
Remove screw
as far as possible without blocking the rear wheel. Secure the
rear wheel in this position.
–
Remove screw
and remove the shock absorber.
V01289-10
Main work
–
Push splash protector
absorber. Mount and tighten screw
Guideline
Screw, top
shock absorber
–
Mount and tighten screw
Guideline
V01289-11
Screw, bottom
shock absorber
–
Attach brake line.
1
.
M6
6 Nm (4.4 lbf ft)
2
.
M6
6 Nm (4.4 lbf ft)
p. 55)
p. 46)
1
and lower the rear wheel with the link fork
2
3
, push splash protector
1
to the side and position the shock
2
.
M12
60 Nm (44.3 lbf ft)
3
.
M12
60 Nm (44.3 lbf ft)
to the side,
®
Loctite
2701™
®
Loctite
2701™
57