Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - Husqvarna TC 65 2020 Owner's Manual

11.41

Checking the frame

11.42

Checking the link fork

11.43

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in the throttle cable comply with the specifica-
tion.
SERVICE WORK ON THE CHASSIS 11
–
Check the frame for cracks and deformation.
» If the frame exhibits cracks or deformation due to a
mechanical impact:
–
Change the frame.
601599-01
–
Check the link fork for damage, cracking, and deformation.
» If the link fork shows signs of damage, cracking, or defor-
mation:
–
Change the link fork.
V00216-01
Preparatory work
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the left side cover. (
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Remove the fuel tank.
Main work
–
Check the throttle cable routing.
The throttle cable must be routed behind the handlebar,
behind the coolant hose and on the left of the frame.
» If the throttle cable routing is not as specified:
–
Correct the throttle cable routing.
E00567-01
Info
Always replace a frame that has been
damaged due to a mechanical impact. Repair
of the frame is not authorized by Husqvarna
Motorcycles.
Info
Always replace a damaged link fork. Husq-
varna Motorcycles does not permit repairing
link forks.
p. 55)
p. 50)
p. 52)
( p. 59)
67