Checking The Shift Mechanism - Husqvarna FC 450 2018 Repair Manual

17 ENGINE
-
Check damping rubber pieces
-
Check inner clutch hub
-
Check the thrust surfaces of the clutch facing discs in clutch basket Gi) for damage and wear.
-
Check needle bearings
-
Check intermediate clutch discs � for damage and wear.
-
Check clutch facing discs
-
Check the thickness of the clutch disc pack.
Clutch disc pack - thickness
17.4.37
-
Check shift forks
212
If there is damage or wear:
-
Change the clutch center.
(D
If there is damage or wear:
-
Change the damping rubber pieces.
@)
for damage and wear.
If there is damage or wear:
-
Change the inner clutch hub.
If there is damage or wear:
-
Change the clutch facing discs and the clutch basket.
48
and collar bushing
If there is damage or wear:
-
Change the needle bearings and collar bushing.
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
e
for discoloration and scoring.
If there is discoloration or scoring:
-
Change all clutch facing discs.
Wear limit
If the clutch disc pack does not meet specifications:
-
Change the clutch disc pack.

Checking the shift mechanism

O
6)
on plate
for damage and wear.
48
for damage and wear.
2:: 26.4 mm (2:: 1.039 in)
for damage and wear (visual check).
D04266-10