Replacing Gasket Ring For Left Rigid Shaft (Octavia Ii, Superb Ii, Yeti) - Skoda Fabia II 2007 Workshop Manual

5 - Conical screw
❑ Replace after disassembly
❑ 30 Nm
6 - Sealing ring
❑ for the left rigid shaft
❑ Renew. ⇒ "1.2 Replacing gasket ring for left rigid shaft (Octavia II, Superb II, Yeti)", page 179
❑ for left flange shaft
❑ Renew. ⇒ "1.4 Replacing the left flange shaft gasket ring", page 185
7 - Left rigid shaft up to 11.2008
❑ Removing and installing
⇒ "1.2 Replacing gasket ring for left rigid shaft (Octavia II, Superb II, Yeti)", page 179
❑ as of "11.2008" replaced by flange shaft
❑ Removing and installing
8 - O-ring
❑ Replace after disassembly
❑ not present if the flange shaft is installed
9 - Circlip
❑ insert into the round slot of the rigid shaft
❑ Replace after disassembly
❑ not present if the flange shaft is installed
10 - Conical screw
❑ Replace after disassembly
❑ 30 Nm
Different output shafts of gearbox 0AM
♦ -A- - Rigid shafts up to 11.2008
♦ -B- - Flange shafts as of 11.2008
1.2 Replacing gasket ring for left rigid shaft
(Octavia II, Superb II, Yeti)
Special tools and workshop equipment required
♦ Inertia extractor - MP9-501 (VW 771)-
♦ Extractor - MP3-419/37 (VW 771/37)-
♦ Socket insert - T10107A- or socket insert 6 mm, commercially
available
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
⇒ page 179
⇒ "1.4 Replacing the left flange shaft gasket ring", page 185
Gearbox 0AM-DSG - Edition 01.2015
.
1. Replace gasket rings for rigid shafts and flange shafts
.
179