Skoda Fabia II 2007 Workshop Manual page 94

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
• Before installing the mechatronics, make sure that no oil is in
the gearbox.
• The assembly lever - T10407- is inserted between the engag‐
ing levers of the double clutch gearbox and the gearbox hous‐
ing.
– Suction off residual oil from the gearbox with diesel suction
device, e. g. -VAS 5226- .
All shift forks have 3 positions:
The centre position is shown in the figure as position -N- (neutral).
No gear is engaged in this position, i.e neutral (neutral position)
is engaged.
– First check all 4 shift forks by hand.
– Consecutively bring all 4 shift forks once into each position
-arrows-, if necessary turn a little on the pinions.
– Then bring all the shift forks back to the centre position, posi‐
tion -N-.
90
Rep. gr.34 - Controls, housing