Installing The Lock Button At The Selector Lever Handle - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Tighten warm-type clamp -arrow- using the hose binding claw .
Note
The selector lever handle is correctly locked only if the warm-
♦
type clamp is tensioned. Only then the lock button at the
handle may be pressed.
The lock button may be slightly sluggish when pressing it for
♦
the first time after installing the selector lever handle.
– Press lock button at selector lever handle.
– Install trim panel for selector lever position indicator - Y6-
⇒ "2.5 Removing and Installing the cover for the shift mecha‐
nism", page 109 .
– Inspect gearshift mechanism
⇒ "2.2 Inspecting the gearshift mechanism", page 104
2.7 Installing the lock button at the selector
lever handle
Special tools and workshop equipment required
♦ Release tool - T40203-
• The lock button -2- at the selector lever handle protrudes in its
installed position.
If the lock button -2- was inadvertently pressed in, it must then be
repositioned in order to fit the selector lever handle.
116
Rep. gr.34 - Controls, housing
.