Skoda Fabia II 2007 Workshop Manual page 168

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Unscrew the nuts -3- from the left frame side rail and tie up the
radiator fan control unit - J293- -4-.
Do not disconnect the plugs -1- and -2-.
Continued for all vehicles
– Unscrew the fixing screws -arrows 1- for the gearbox mount
at the console -A-.
– Screw out the rear fixing screw -arrow 2- for the console -A-
at the gearbox.
– Lower the engine/gearbox assembly via the spindles to the
dimension -a- by approx. 85 mm.
• The engine/gearbox assembly must be lowered so that the
fixing screws of the console/gearbox are loosened and can be
unscrewed (following figure).
– Unscrew the fixing screws -arrows- for the console on the
gearbox.
– Remove the gearbox console.
The gearbox mount - 3282- is placed on the engine/gearbox jack
- V.A.G 1383 A- and is aligned using the adjusting plate - 3282/59-
to remove the gearbox.
164
Rep. gr.34 - Controls, housing