Skoda Fabia II 2007 Workshop Manual page 194

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Carefully drive the new gasket ring into the gearbox up to the
stop, during this procedure do not twist the gasket ring.
– Insert the flange shaft.
– Tighten new conical screw to the specified tightening torque.
– Fit the right drive shaft to the flange shaft ⇒ Chassis; Rep. gr.
40 .
– Install protective cap for right drive shaft on the engine
-arrows- ⇒ Chassis; Rep. gr. 40 .
– Change gearbox oil
Note
The gearbox oil must be changed, only in this way the correct gear
oil level can be ensured.
– Install the noise insulation ⇒ Body Work; Rep. gr. 50 .
Specified torques
Component
Flange shaft on gearbox (conical screw)
Protective cap for drive shaft on engine
190
Rep. gr.39 - Final drive - differential
⇒ "5 Change gearbox oil", page 174
⇒ "1.1 Summary of components - gasket rings and output shafts",
.
Nm
page 178
35