Skoda Fabia II 2007 Workshop Manual page 188

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Tie up the drive shaft as far as possible. Avoid damaging the
paintwork on the drive shaft during this operation.
– Position the catch pan under the gearbox.
– Release the screw -arrow- in the rigid shaft with the socket
insert - T10107A- or a commercially available 6°mm socket
insert.
– Pull out rigid shaft.
– Remove the gasket ring of the rigid shaft e.g with extractor tool
- T20143- or tyre iron.
Installing
– Lightly oil new gasket ring at outer surface.
– Fill half the space between the sealing lip and dust lip with
sealing grease - G 052 128- .
Caution
Do not press in gasket ring with pressure plate - T30028
(3305)- up to the stop!
The shaft seal reaches its inner stop in the gearbox before the
thrust piece - T30028 (3305)- .
The pressure plate - T30028 (3305)- can therefore not be type-
punched up to the stop of the tool.
– Drive in the new gasket ring up to the gasket ring stop with
feeling, while doing so , do not tilt the gasket ring.
184
Rep. gr.39 - Final drive - differential