Skoda Fabia II 2007 Workshop Manual page 57

– Install the old circlip of the outer drive shaft -arrow-.
Determine dimension -B-.
– Place the straightedge - T40100- upright on the flange of the
clutch housing.
Caution
The straightedge - T40100- must remain in this position during
the following measurements.
Do not turn or remove it.
– Place the digital depth gauge -A- on the outer drive shaft -B-.
– Perform null balance of the digital depth gauge .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
53
1. Clutch operation