Skoda Fabia II 2007 Workshop Manual page 97

• The seal for mechatronics for double clutch gearbox - J743-
must be attached all around.
– Check the sender. The clip must not be damaged.
– Install mechatronics.
When handling and installing, make sure that the shift forks are
not unintentionally pressed out of their position. Also pay attention
to the engaging lever and the tappet of the mechatronics.
– Screw in the screws -A- (3 pieces, M8 x 35) and -B- (2 pieces,
M8 x 90) crosswise by hand.
– Remove guide bolts - T10406- .
– Screw in the remaining screws -B- (2 pieces, M8 x 90) by hand.
• Make sure that the tappets grip precisely into the engaging
lever bearing. Pull out the tappets by hand until they fit in these
bearings.
– Check the position of the tappets once again.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
1. Mechatronics for double clutch gearbox J743
93