Skoda Fabia II 2007 Workshop Manual page 144

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Unscrew the last connecting screw -arrow- at engine and
gearbox.
– Separate the gearbox from the engine and carefully lower it.
– When lowering the gearbox, guide the selector lever control
cable out of the cable support.
Caution
Observe all lines and coolant hoses when lowering the gear‐
box.
Do not bend or buckle selector lever control cable.
Vehicles with flange shafts (as of 11.2008)
– Reinstall the right flange shaft.
Continued for all vehicles
In some cases, they are installed at the front holder on the gear‐
box.
Note
If a new gearbox is installed, the holders must be modified to the
new gearbox. holder
Transport the gearbox and secure it to the assembly stand
⇒ "4 Transport the gearbox and secure to the assembly support",
page 172 .
3.1.2 Remove gearbox (Superb II)
Special tools and workshop equipment required
♦ Supporting device - MP9-200 (10-222 A)-
♦ Adapter - MP9 200/18 (10-222 A /18)-
♦ Mounting bracket - T10346-
♦ Wedge - T10161-
♦ Hook for MP9-200 and T30099 - MP9-200/10 (10-222A/10)-
♦ Removal tool for the inner lining of the door panel -MP8-602/1-
♦ Gearbox mount - 3282-
♦ Bolt - 3282/29-
♦ Adjusting plate - 3282/59-
♦ Tensioning strap - T10038-
♦ Socket insert - T10107 A-
♦ Engine/gearbox jack , e.g. -V.A.G 1383 A-
♦ Spring strap clips , e.g. -VAS 6340-
♦ Socket insert , e.g. -T10035- or socket insert XZN 14 - T10061-
Observe instructions and safety instructions for automatic gear‐
box DSG - 0AM.
♦ ⇒ "2 Safety instructions", page 2
140
Rep. gr.34 - Controls, housing