Skoda Fabia II 2007 Workshop Manual page 37

gearbox up to 05.2011",
page 41
6 - Screw
❑ Replace after disassembly
❑ 8 Nm + 90°
7 - Clamp
❑ not present on some older gearboxes
❑ replace when replacing the double clutch
8 - Support for the engaging lever
❑ replace when replacing the double clutch
1.1.2 Summary of components - Clutch release mechanism, version as of
06.2011
1 - Adjusting washer for K1
clutch
❑ Determine thickness
⇒ "1.3.2 Adjusting the
clutch release mecha‐
nism, gearbox as of
06.2011", page 51
2 - Large engaging lever for K1
clutch
❑ together with large en‐
gaging bearing
❑ replace when replacing
the double clutch
3 - Hinge bearing
❑ for large engaging lever
Pos. 2 2
❑ is not replaced
4 - Small engaging bearing for
K2 clutch
❑ replace when replacing
the double clutch
5 - Adjusting washer for K2
clutch
❑ Determine thickness
⇒ "1.3.2 Adjusting the
clutch release mecha‐
nism, gearbox as of
06.2011", page 51
6 - Guide bushing-top part
❑ for small engaging lever
Pos. 7
❑ is removed and installed
together with the guide
bushing-bottom part
Pos. 7
7 - Small engaging lever for K2 clutch
❑ is removed and installed together with the top and bottom part of the guide bushing
❑ replace when replacing the double clutch
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
33
1. Clutch operation