Skoda Fabia II 2007 Workshop Manual page 124

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Remove the rear tunnel bridge -1- and the front tunnel bridge
-2- from the body (if present).
– Slacken the trim panels for the underfloor on left -6- and right
-7- from the body.
Caution
The decoupling element in the pre-exhaust pipe should not be
bent by more than 10° - risk of damage.
– Detach the bracket -3- for exhaust system from the assembly
carrier.
– Separate exhaust system at the clamping sleeve -4- ⇒ En‐
gine; Rep. gr. 26 .
Vehicles Octavia II, Superb II, Yeti, Rapid NH
Note
The aid of a 2nd mechanic is required to remove the rear silencer.
– Remove the rear part of the exhaust system -5- as from the
clamping sleeve ⇒ Engine; Rep. gr. 26 .
– Unclip lambda probe cable at heat shield.
– Loosen the clips -arrows- and remove the heat shield to the
rear.
120
Rep. gr.34 - Controls, housing