Skoda Fabia II 2007 Workshop Manual page 50

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Please read off the value of the clutch tolerance from the new
clutch.
♦ The clutch tolerance value you have read off for clutch K1 is
0.0 mm
Determining the thickness of the adjusting washer SK1
The thickness of adjusting washer SK1 is now determined as fol‐
lows on the basis of the determined clutch play and clutch toler‐
ance for clutch K1.
Clutch play of clutch K1
-/+ Clutch tolerance of clutch K1
= Determined thickness of adjusting washer SK1
Example calculation:
♦ 1.48 mm + 0.0 mm = 1.48 mm
♦ Determined thickness of adjusting washer SK1 = 1.48 mm
– Select the correct washer from the table.
Determined thickness of the
washer
from to
0,31 0,90
0,91 1,10
1,11 1,30
1,31 1,50
1,51 1,70
1,71 1,90
1,91 2,10
2,11 2,30
2,31 2,50
2,51 2,70
2,71 3,30
Example:
♦ Determined thickness of adjusting washer SK1 = 1.48 mm
♦ Selected thickness of the adjusting washer = 1.4 mm
– Measure all the adjusting washers and prepare the corre‐
sponding adjusting washer for installation.
Caution
Risk of damage to gearbox!
♦ Mark adjusting washer SK1 and prepare it as follows for
installation.
♦ Only this adjusting washer SK1 may be used for adjust‐
ment
46
Rep. gr.30 - Clutch
Washer to be installed in mm
0,8
1,0
1,2
1,4
1,6
1,8
2,0
2,2
2,4
2,6
2,8