Skoda Fabia II 2007 Workshop Manual page 126

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Insert the shift mechanism and tighten the rear nuts -1- by
hand.
– Mount the strut for centre console -3- onto the shift mechanism
as illustrated in the fig.
– Tighten nuts -1- and -2-.
The fitting together of the plug connection -A- must not be per‐
formed, if the plug connector housing is latched into the shift
mechanism. When fitting together (high resistance because of the
spring) the catch of the plug connector housing breaks off.
– Connect plug -A- and plug connector housing and then latch
into the shift mechanism.
Note
As of production date 06.2009 the shift mechanism is changed,
the 4-pin plug connection -B- and the selector lever lock solenoid
- N110- -1- are already located in the shift mechanism
⇒ "2.1.2 Summary of components - Gearshift mechanism as of
06.2009 - (Octavia II, Superb II, Yeti, Rapid NH)", page 99
– Install the air guide and the centre console ⇒ Body Work; Rep.
gr. 68 .
– Install ashtray or storage area in front of the shift mechanism
⇒ Body Work; Rep. gr. 68 .
Vehicles Fabia II, Roomster
– Install the gearshift mechanism with selector lever control ca‐
ble and attach it to the shift housing with screws -arrows-.
– Mount the plug connection -A- and position the noise insula‐
tion on the gearshift mechanism.
– Install centre console ⇒ Body Work; Rep. gr. 68 .
Continued for all vehicles
– Install handle for shift mechanism.
♦ up to production date 11.2012 (CW 45)
⇒ "2.6.1 Removing and installing handle for shift mechanism
up to 11.2012 (CW 45)", page 112
♦ as of production date 11.2012 (CW 45)
⇒ "2.6.2 Removing and installing handle for shift mechanism
as of 11.2012 (CW 45)", page 114
– Installing the cover for the shift mechanism
⇒ "2.5 Removing and Installing the cover for the shift mecha‐
nism", page 109 .
122
Rep. gr.34 - Controls, housing
.