Skoda Fabia II 2007 Workshop Manual page 32

Hide thumbs Also See for Fabia II 2007:
Table of Contents

Advertisement

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
❑ Tiptronic switch - F189- , selector lever sensor control unit - J587- and selector lever switch locked in P
- F319- are integrated into the shift mechanism.
❑ these components cannot be replaced separately; the removal and installation procedure is only possible
together with the gearshift mechanism
⇒ "2.8 Removing and installing shift mechanism with selector lever control cable", page 118
8 - Brake light switch - F- and brake pedal switch - F47-
❑ Fitting location
⇒ page 28
❑ is checked by self-diagnosis
❑ removing and installing ⇒ Chassis; Rep. gr. 47
9 - Kick-down switch - F8-
❑ Fitting location
⇒ page 29
❑ Signal transfer from engine control unit to gearbox control unit via CAN databus
❑ is checked by self-diagnosis
❑ Removing and Installing ⇒ Engine; Rep. gr. 20
Mechatronics for double clutch gearbox - J743-
Fitting location: The mechatronics for double clutch gearboxes -
J743- is screwed onto the front gearbox housing.
The control unit is firmly integrated in the mechatronics for double
clutch gearbox - J743- .
The senders and the actuators are located in the mechatronics
for double clutch gearbox - J743- . Further information can be
found in ⇒ Self-study programme No. 75 ; Automatic gearbox
DSG - 0AM .
Removing and installing the mechatronics for double clutch gear‐
box - J743-
⇒ "1 Mechatronics for double clutch gearbox J743 ", page 77
Gearbox input r.p.m. sender - G182-
Fitting location: The gearbox input speed sender - G182- is clip‐
ped onto the front of the gearbox housing. Release the sender for
removal and pull out in -direction of arrow-.
The gearbox input r.p.m. sender - G182- can only be replaced
together with the mechatronics for double clutch gearbox - J743-
⇒ "1 Mechatronics for double clutch gearbox J743 ", page 77
Brake light switch - F- and brake pedal switch - F47-
Fitting location: The brake light switch - F- and brake pedal switch
- F47- -3- is located on the master brake cylinder.
28
Rep. gr.00 - Technical data
.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents