Safety Instructions; Explanation Of Safety Instructions; General - Fronius Virtual Welding 2.0 Operating Instructions Manual

Safety Instructions

Explanation of
Safety Instruc-
tions
Indicates an immediate danger.
▶
Indicates a possibly dangerous situation.
▶
Indicates a situation where damage or injury could occur.
▶
NOTE!
Indicates the possibility of flawed results and damage to the equipment.

General

The device has been manufactured in line with the state of the art and according
to recognized safety standards. If work is carried out improperly or the device is
used incorrectly or misused, however, it can cause:
-
-
-
All persons involved in the commissioning, operation, maintenance, and servicing
of the device must
-
-
The Operating Instructions must always be kept to hand wherever the device is
being used. In addition to the Operating Instructions, all applicable local rules
and regulations regarding accident prevention and environmental protection
must also be followed.
All safety and danger notices on the device:
-
-
-
-
For the location of the safety and danger notices on the device, refer to the sec-
tion headed "General" in the Operating Instructions for the device.
Before switching on the device, remove any faults that could compromise safety.
Your personal safety is at stake!
6
DANGER!
Death or serious injury may result if appropriate precautions are not taken.
WARNING!
Death or serious injury may result if appropriate precautions are not taken.
CAUTION!
Minor injury or damage to property may result if appropriate precautions are
not taken.
Serious or fatal injury to the operator or third parties
Damage to the device and other material assets belonging to the operating
company
Inefficient operation of the device
Be suitably qualified
Have fully read, understood, and precisely followed these Operating Instruc-
tions
Must be kept in a legible state
Must not be damaged/marked
Must not be removed
Must not be covered, pasted, or painted over