Press The Ok Button - Canon PIXMA MP620 Series Getting Started

1?J WPS setting
Push button method
PIN method
lit Push button method
Connect to
a wireless LAN
access point supporting the
WPS push button method.
Next
'i'~,
Push button method
Prepare a wireless LAN
access point. For details, see
the access point manual.
When ready, press
1!13
of
the device.
Start connection
Following
IS
completed.
WPS setting
Macintosh
Windows
Next, read "Install the Software" !
• A timeout error occurs if setup is not completed within two minutes. When the timeout error screen
appears, refer to "5.12 The Timeout error screen is displayed during WPS setup" in the printed
manual: Network Setup Troubleshooting.
• The WPS button may be named differently depending on your access point. For details, refer to the
manual of your access point.
The completion screen appears on the LCD of the machine, then the LAN settings screen returns.
When the access point is ready, press the OK button on the machine, then press the
WPS button on the access point within two minutes.
~
t;;J;;I
Press the OK button.
To use the PIN code method for setup, select PIN method
on step
0,
then press the OK button. Follow the on-screen is
instructions to operate the machine and access point. When
the setup is complete, the completion screen appears then
the LAN settings screen returns. A timeout error occurs if
setup is not completed within 10 minutes. If the timeout error
screen appears, refer to "5.12 The Timeout error screen is
displayed during WPS setup" in the printed manual: Network
Setup Troubleshooting.
Select Push button
method, then press the
OK button.
~
t;;J;;I