Press The Ok Button - Canon PIXMA MX860 series Getting Started

Wireless LAN settings are
completed.
Press
lmI.
Prepare a wireless LAN
access point. For details,
see the access point
manual.
When ready, press
lmI
of
the machine.
Hl Push button method
~-----------------
When the access point is ready, press the OK button on the machine, then
press the WPS button on the access point within two minutes.
When the completion screen appears, press the OK button. The LAN settings screen
returns.
• The WPS button may be named differently depending on your access point. For details,
refer to the manual of your access point.
• A timeout error occurs if setup is not completed within two minutes. When the timeout error
screen appears, refer to "5.12 The Timeout error screen is displayed during WPS setup" in
the printed manual: Network Setup Troubleshooting.
W _
Next
Connect to a wireless LAN
access point supporting
the WPS push button
method.
Hl Push button method ~
Press the OK button.
...
Make sure that Push button
method is selected and press the
OK button.
• •
• •
I
I
·w
I .
To u-se-th-e-p-I-N-c-o-d-e-m-et-h-o-d-fo-r-s-e-tu-p-,-s-e-Ie-c-t -P-IN-co-d-e-m-e-t-ho-d-o-n-s-te-p-0-'-' -th-e-n-p-r-e-ss-
the OK button. Follow the on-screen is instructions to operate the machine and access
I point. When the setup is complete, the completion screen appears. Press the OK button,
then the LAN settings screen returns. A timeout error occurs if setup is not completed
within 10 minutes. If the timeout error screen appears, refer to "5.12 The TImeout
I
error screen is displayed during WPS setup" in the printed manual: Network Setup
Troubleshooting.
I
Next, read "Install the Software" !
Windows
P.26