Figure 4-10: Lvds Connector - IEI Technology PM-PV-N4551/D5251 User Manual

Step 2: Insert the cable connector. Insert the connector from the LVDS PCB driving
board to the LVDS connector as shown in Figure 4-10. When connecting the
connectors, make sure the pins are properly aligned.
WARNING:
The diagram below is merely for illustration. The configuration and
connection of the cables from the TFT LCD screen being installed may
be different. Please refer to the installation manual that came with the
TFT LCD screen.

Figure 4-10: LVDS Connector

Step 3: Locate the backlight inverter connector. The location of the backlight inverter
connector is shown in Chapter 3.
Page 50
PM-PV-N4551/D5251 User Manual