Unpacking - IEI Technology PM-PV-N4551/D5251 User Manual

PM-PV-N4551/D5251 User Manual
WARNING:
A CPU should never be turned on without its heat sink being installed.
If the heat sink is removed and the system turned on, permanent
damage to the CPU, PM-PV-N4551/D5251 and other electronic
components attached to the system may be incurred. Running a CPU
without a heat sink may also result in injury to the user.

4.3 Unpacking

When the PM-PV-N4551/D5251 is unpacked, please do the following:

Follow the anti-static precautions outlined in Section 4.1.

Make sure the packing box is facing upwards so the PM-PV-N4551/D5251
does not fall out of the box.

Make sure all the components in the unpacking list are present.
NOTE:
If some of the components listed in the unpacking list are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the PM-PV-N4551/D5251 from or contact an IEI
sales representative directly. To contact an IEI sales representative,
please send an email to sales@ieiworld.com.
Page 39