Closing Procedures; End Of Day Operation - ELECTRO FREEZE CS700-FG Operator's Manual

ELECTRO FREEZE Shake Model CS700-FG
9

End of Day Operation

1. In areas where state and local
health codes allow and if permitted by the
franchise, the product may remain in the
freezer.
2. Leave the Selector Switch in the
"AUTO" position.
3. The plunger rod must be in place
for the unit to operate.
4. Clean all soiled surfaces with a
warm dish detergent solution.
5. Using the small brush supplied in
the spare parts kit, brush the bottom of
the plunger with a warm dish detergent
solution, then brush with sanitizing
solution.
6. Check mix level in hopper to
ensure that there is enough mix to
keep the indicator light off, add mix if
necessary.
22 185231-17