Closing Procedures; Night Switch Operation - ELECTRO FREEZE SLX400E Operator's Manual

ELECTRO FREEZE Soft Serve Models SLX400E, SLX500
11

Closing Procedures

11.1

Night Switch Operation

ROTATE
Figure 11-1 Mix Feed Tube Positions
32
1. In areas where state and local health
codes allow, the freezer may be
switched to night operation, which will
MIX INLET PORT
allow the freezer to cycle all night and
INDICATOR
maintain 40
in the cylinder and hopper.
2. To switch the freezer to the night
mode, press the soft key under the
3. Remove nozzles, and clean the drip
tray assembly and all soiled surfaces
with soap and water. Use sanitizing
MIX INLET PORT
solution in a spray bottle and brush
to clean the bottom of the plunger
openings.
4. Turn the mix feed regulator to the
"CLOSED" position.
5. Check mix level in hopper to ensure
that there is enough mix to keep
the indicator light off, add mix if
necessary. Do not dispense product
when the mix feed regulator is in
the "CLOSED" position.
6. To start the machine after using the
"NIGHT" mode, press
button and replace the sanitized
nozzles.
7. "OPEN" the mix feed regulator and fill
the hopper with mix.
º º
F (4 C). or lower product
"NIGHT" icon.
freeze
184584