Table of Contents
Advertisement
Chapter 5 To Trigger the Oscilloscope
RIGOL
Noise Rejection
Noise rejection can reject the high frequency noise in the signal and reduce the
possibility of miss-trigger of the oscilloscope.
In the trigger control area (Trigger) on the front panel, press Menu to enter the
trigger setting menu, then press Noise Reject continuously (for some triggers,
Noise Reject is a sub menu under More, at this time, press Menu → More →
Noise Reject) to enable or disable noise rejection.
Note:
This function is only available when the trigger source is an analog channel.
MSO5000 User Guide
5-7
Advertisement
Table of Contents
