Bios Menu 21: Graphics Configuration - IEI Technology NANO-QM770-R10 User Manual

Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Graphics Configuration
IGFX VBIOS Version
Igfx Frequency
Primary Display
PEG0 – Gen X
DVMT Pre-Allocated
DVMT Total Gfx Mem
Primary IGFX Boot Display
LCD Panel Type
Backlight Control
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.

BIOS Menu 21: Graphics Configuration


Primary Display [IGFX]
Use the Primary Display option to select the primary graphics controller the system uses.
The following options are available:

IGFX

PEG

PEG0 – Gen X [Gen1]
Use the PEG0 – Gen X option to configure PEG0 B0:D1:F0. The following options are
available:

Gen1

Gen2

Gen3

DVMT Pre-Allocated [128MB]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can
Page 84
2132
350 MHz
[IGFX]
[Gen1]
[128M]
[MAX]
[VBIOS Default]
[By Hardware]
[Inverted]
Default
Default
NANO-QM770 EPIC SBC
Select which of
IGFX/PEG/PCI Graphics
device should be Primary
Display Or select SG for
Switchable Gfx.
----------------------
: Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit