Table of Contents
Advertisement
SC836 Chassis Manual
3-2
Control Panel Buttons
The chassis includes two push-buttons that control power to the system.
Power
The main power switch is used to apply or remove power from the power supply
to the server system. Turning off system power with this button removes the main
power but keeps standby power supplied to the system. Therefore, you must unplug
system before servicing.
Reset
The reset button is used to reboot the system.
3-3
Control Panel LEDs
There are six LEDs that provide status information about the system.
Power
Indicates power is being supplied to the system power supply units. This LED should
normally be illuminated when the system is operating.
HDD
Indicates activity on the hard drive when flashing.
3-2
Advertisement
Table of Contents
