Table of Contents
Advertisement
SC217 Chassis Manual
4-2
Control Panel Buttons
•
Power: The main power button on each of the control panels is used to apply
or remove power from the power supply to associated node Turning power to
the system off with this button removes the main power, but keeps standby
power supplied to the system. The power button has a built-in LED which will
turn green when the power is on.
•
UID: When used with a UID compatible motherboard, the UID button is used
to turn on or off the blue light function of the LED. This light is displayed in the
front as part of the UID button and with a separate LED at the rear of the node.
The light helps locate the node in large racks and server banks.
4-3
Control Panel LEDs
Each control panel has two LEDs that provide critical information about parts of
the system.
•
NIC: Indicates network activity on either LAN1 or LAN2 when flashing.
4-2
Advertisement
Table of Contents
