Table of Contents
Advertisement
SC823M Chassis Manual
4-2
Control Panel Buttons
There are two buttons located on the front of the chassis: a reset button and a
power on/off button, located on the front of the chassis.
Reset: The reset button is used to reboot the system.
Power: The main power switch is used to activate or deactivate power to the
server system. Turning off system power with this button removes the main
power but keeps the standby power. Therefore, you must unplug system before
servicing.
4-3
Control Panel LEDs
The control panel located on the front of the SC823M chassis has six LEDs.
These LEDs provide you with critical information related to different parts of the
system. This section explains what each LED indicates when illuminated and any
corrective action you may need to take.
!
Power Failure: When this LED flashes, it indicates a power failure in the power
supply.
4-2
Advertisement
Table of Contents
