Table of Contents
Advertisement
4-5
Expansion Cards
The chassis includes seven PCI slots for full-height, full-length expansion cards.
Installing Expansion Cards
1. Power down the system as described in Section 4-2, lay the chassis on a flat
surface, and open the chassis cover.
2. Remove the screw holding the chassis slot shield in place.
3. Insert the expansion card into the serverboard slot, while aligning the expansion
card shield with the slot in the rear of the chassis.
4. Secure expansion card shield to the chassis using the screw previously removed.
Chapter 4: Chassis Setup and Maintenance
4-9
Advertisement
Table of Contents
