Table of Contents
Advertisement
SC836 Chassis Manual
E-4
Connecting to the Front and Rear Backplanes
SC847D JBOD Chassis Cabling
E16 I
C Cabling
2
Use the following diagram to connect the CB3 power board to the front and rear
backplanes in SC847D JBOD E16 model chassis.
Jumper
Setting
Pins 1-2: SAS3 enabled
JP5
Pins 2-3: SAS2 enabled and SC847
When enabling SAS2/SAS3 functionality, use connectors JP1-JP4, (see Page E-4)
and set the JP5 jumper to pins 1-2 (SAS3) or pins 3-4 (SAS2).
When an SC847D chassis is being used, use connectors J4-J7 (see Page E-4) and
set the JP5 jumper to pins 2-3.
BPN-EXP-847DF3EL1
CBL-0157L, 40 cm
CSE-PTJBOD-CB3
Jumper Settings
Front Expander
Figure CB3-4. E16 I
CBL-0157L-01, 60 cm
BPN-EXP-847DF3EL1
C Cabling
2
E-6
Rear Expander
Advertisement
Table of Contents
