Table of Contents
Advertisement
With an optional drive kit (MCP-220-83605-0N), the SC836B chassis models can
support two hot-swap drive bays located in the rear of the chassis. For information
on which drives are compatible contact Supermicro's Technical Support department
at www.supermicro.com.
D-1 Identifying the Drive Kit Components
The photograph below shows the components in the kit that are required to install
hard drives into the rear of the chassis:
1
A
Figure D-1. SC836B Rear Drive Kit (MCP-220-83605-0N)
Rear Hard Drive KIt Components
A. Hard drive cage with two 2.5" drive trays (MCP-220-00047-0B x2)
B. Hard drive cage backplane (BPN-SAS-510T)
C. Four-pin power supply Y-cable (CBL-0234L) for hard drives
D. Two SATA cables (CBL-0179L or CBL-0481L x2; cable CBL-0179L is shown in
picture above)
Appendix D
SC836B Added Features
1
B
D-1
Appendix D: SC836B Added Features
1
C
1
D
Advertisement
Table of Contents
