Preset Setting - Vitek VT-TTAR810 User Manual

In the "Add Cruise" window, you can click
preset time and speed. Click
Click to start the cruise and click
operation tab; click "Delete" button to delete the selected cruise.
You can also go to cruise setting interface for cruise setting, see 6.3 Cruise Setting for details.

6.2 Preset Setting

Click StartàSettingsàCameraàPTZàPreset to go to the interface as shown below.
Ø Add preset
Select camera and then click "Add" button to add preset; or click
the right side of the interface to display the preset information of the dome and then click
to add preset. The operations of the "Add Preset" window are similar to that of the
PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.
Ø Edit preset
Select camera and preset. You can input a new name of the preset and then click
the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset and
then click "Save Position" to save the preset.
Ø Delete Preset
Select camera and preset and then click "Delete" to delete the preset.
to delete the preset. Click "Add" button to save the cruise.
to stop the cruise in the cruise list of the cruise
42
Transcendent DVR Series
to reselect the preset, then change the
in the camera list on
to save