Table of Contents
Advertisement
Transcendent VT-TR5HA DVR Series
3 Wizard & Main Interface
3.1
Startup Wizard
The disk icons will be shown on the top of the startup interface. You can view the number and
status of each disk quickly and conveniently through these icons (
disk;
: RW available disk).
You can quickly configure the DVR by using the wizard setup. You must use the wizard setup
when you start the DVR for the first time (click "Skip" to cancel the wizard next time)
Click "Wizard Setup" to start wizard. The setting steps are as follows.
System Login. Set your own password or use the default when you use the wizard for the
first time (the default username of the system is admin and the default password of admin is
123456); select the login username and enter the corresponding password next time.
Click "Edit Security Question" to set questions and answers for password security of admin. If
you forget the password, please refer to Q4 in Appendix A FAQ for details.
Click "Next" to continue or click "Cancel" to exit the wizard.
Date and Time Configuration. The date and time of the system needs to be set up when
you use the wizard for the first time. Refer to the following figure. Set the time zone, system
time, date format and time format. The DST will be enabled by default if the time zone selected
includes DST. Click "Next" to continue.
17
: no disk;
: unavailable
Advertisement
Table of Contents
