19.
MISSING LINE MEASUREMENT
The Missing line measurement is used to measure the slope
distance, the horizontal distance, and the height difference be-
tween the starting position (PI) and any other points without
moving the instrument itself.
The SET2C can measure the distances t o many points continu-
ousli/.. It is also possible t o change the starting position to that of
the last-measured point.
P.94
Helght difference
(V)
ln~tlal position No
1
lnttial posttlon No.2
Instrument statlon
19.1 Measurement mode selection
Select the measurement mode from the following according t o
your required measurement.
See P.38 "13.1 Measurement mode selection" for key operation.
Units
I
m m
10rnm
@+
Measurement time
5.6 secs
First 5.6 secs & every 3.3 secs
2.9 secs
First 2.9 secs & every 0.7 secs
First 2.8 secs & every 0.7 secs
1
2
3
Measurement type
Fine meas.
Coarse rneas.
Single
Repeat
Single
Repeat
Tracking meas.