Table of Contents
Advertisement
Chapter Overview
This chapter contains product safety information for the
SR-70/80 Rubber Track Loaders. Read and under-
stand all product safety information before attempting
to service any Rubber Track Loader.
Safety Messages
Safety messages are included in this document to
serve as warnings of potentially dangerous conditions.
Failure to follow their instructions could result in injury
or death.
These messages are identified by the headings:
!DANGER!....!WARNING!....!CAUTION!.
The messages are to be understood as:
Attention! Your Safety Is Involved!
The information that follows each heading describes
the potential hazard and the precautions necessary to
protect yourself and others from injury. Instructions
may be written or pictorially presented.
!DANGER!
This symbol is used to alert service personnel of an
imminently hazardous situation that will result in serious
injury or death.
!WARNING!
This symbol is used to alert service personnel of a
potentially hazardous situation that could result in seri-
ous injury or death.
!CAUTION!
This symbol is used to alert service personnel of an
unsafe practice that could result in injury.
Information Messages
Information messages are also included in this docu-
ment to supplement the instructions and photographs
in each chapter. These messages are identified by the
labels NOTICE or Note.
NOTICE
This label is used to alert service personnel of a situation
that could lead to equipment or machine damage.
Note: This label is used to provide important additional infor-
mation, further explanation, comments or to stress the impor-
tance of a topic.
The person(s) in charge of servicing a Rubber Track
Loader may be unfamiliar with many of the systems on
the machine. This makes it especially important to use
caution when performing service tasks. Familiarize
yourself with the affected system(s) and components
before attempting any type of maintenance or service.
It is not possible to anticipate every potential haz-
ard. The safety messages included in this docu-
ment and displayed on the machine are not all-
inclusive. They are intended to make you aware of
potential risks and encourage a safe approach to
performing service work. If you use a tool, proce-
dure, work method or operating technique that is
not specifically recommended by ASV, you must
satisfy yourself that it is safe for you and others.
You must also ensure that the machine will not be
damaged or be made unsafe by the operation,
lubrication, maintenance or repair procedures that
you choose.
Basic Precautions
Improper or incomplete maintenance/repair of a Rubber
Track Loader can be dangerous and may result in
machine damage, injury or even death.
Do not attempt to perform any type of repair or mainte-
nance on a Rubber Track Loader until you have read and
fully understood the information in this manual.
Refer to the Operation and Maintenance manual for
instructions regarding proper machine operation tech-
niques before operating any Rubber Track Loader.
Following is a list of basic precautions that should
always be observed.
Safety Labels
Safety labels are displayed in various places through-
out the machine to serve as warnings of potentially
dangerous conditions. Read and understand all
"Safety" labels on any Rubber Track Loader before
attempting to operate, maintain or repair it. Replace
any damaged, illegible or missing labels as necessary.
1-1
https://tractormanualz.com/
1. Product Safety
!WARNING!
Advertisement
Table of Contents
Troubleshooting
