Host Bridge Configuration - IEI Technology KINO-PVN-D5251 User Manual

5.4.1 Host Bridge Configuration

Use the Host Bridge Configuration menu (BIOS Menu 13) to configure the Northbridge
chipset.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Chipset
Initate Graphic Adapter
******* Memory Information *******
Memory Frequency
Total Memory
DIMM#0
DIMM#1
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 13: Host Bridge Chipset Configuration

Initate Graphic Adapter [ION]
Use Initate Graphic Adapter option to select which graphics controller to use as the
primary boot device. Select either an ION graphics controller or a combination of PCI
graphics controller and PCI express (PEG) controller. Configuration options are listed in
the table below:

ION

PCI/PEG
Page 80
KINO-PVN-D5251/D4251/ Mini ITX SBC
[ION]
800 Mhz
2048 MB
2048 MB
Not Present
D Enables ION graphics controller.
EFAULT
Enables PCI/PEG graphics controller.
: Select Screen
 : Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit