Figure B-3: Recovery Tool Setup Menu; Figure B-4: Command Mode - IEI Technology KINO-PVN-D5251 User Manual

KINO-PVN-D5251/D4251/ Mini ITX SBC
Step 3: The recovery tool setup menu is shown as below.

Figure B-3: Recovery Tool Setup Menu

Step 4: Press <5> then <Enter>.

Figure B-4: Command Mode

Step 5: The command prompt window appears. Type the following commands (marked
in red) to create two partitions. One is for the OS installation; the other is for
saving recovery files and images which will be an invisible partition.
(Press <Enter> after entering each line below)
system32>diskpart
DISKPART>list vol
DISKPART>sel disk 0
DISKPART>create part pri size=
DISKPART>assign letter=N
DISKPART>create part pri size=
DISKPART>assign letter=F
DISKPART>exit
system32>format N: /fs:ntfs /q /y
___
___
Page 97