Dvi Display Device Connection; Figure 4-15: Vga Connector - IEI Technology KINO-PVN-D5251 User Manual

KINO-PVN-D5251/D4251/ Mini ITX SBC
Step 3: Insert the VGA
insert the male connector from the VGA screen into the female connector on the
KINO-PVN-D5251/D4251. See Figure 4-15.

Figure 4-15: VGA Connector

Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.

4.9.6 DVI Display Device Connection

The KINO-PVN-D5251/D4251 has a single female DVI-I connector on the external
peripheral interface panel. The DVI-I connector is connected to a digital display device. To
connect a digital display device to the KINO-PVN-D5251/D4251, please follow the
instructions below.
Step 1: Locate the DVI-I connector. The location of the DVI-I connector is shown in
another chapter.
connector. Once the connectors are properly aligned with the
Step 0:
Page 55