Appendix A Specifications - Tandberg Data Autoloader Tandberg LTO2 Installation And User Manual

Appendix A Specifications

Autoloader Main Unit
Maximum data storage capacity
Number of cartridges
SCSI Interface
Dimensions(including filter)
R a c k m o u n t k i t o p t i o n a l
Weight
Maximum data transfer rate
Line voltage
Line frequency
Power consumption
Environmental conditions
[Operating]
Temperature
Relative humidity
Wet bulb temperature
[Non-operating
Temperature
Relative humidity
Wet bulb temperature
*6
[Storage ]
Temperature
Relative humidity
Wet bulb temperature
*5 without cartridge tapes
*6 with cartridge tapes (non-operational cartridge)
200GB×10
*1 9 for Tandberg LTO2 Autoloader w/BCR
*2 2:1 compressed
*3 with Bar Code Reader
Max. 10
Ultra160 LVD
223(W)696(D)×178(H) mm
[8.8(w)×27.4(D)×7.0(H) in.]
*4 A vacant space of 5U is required when
Less than 18kg (39.7lbs.)
35MB/s (native)
70MB/s (at 2:1 compressed)
AC100-127/200-240V (auto voltage select)
50/60Hz
1.3 - 0.5A
10ºC - 35ºC (50ºF - 95ºF)
20% - 80%RH (non-condensing)
26ºC maximum (79ºF)
*5
]
–40ºC - 60ºC (-40ºF - 140ºF)
10% - 90%RH (non-condensing)
26ºC maximum (79ºF)
16ºC - 32ºC (61ºF - 90ºF)
20% - 80%RH (non-condensing)
26ºC maximum (79ºF)
*1 *2
(400GB
*1
mounting this Autoloader into a rack.
- 61 -
*1
×10
)
*4
*3