Tandberg Data Autoloader Tandberg LTO2 Installation And User Manual page 81

Tandberg data tandberg lto2 autoloader installation and user's manual
Table of Contents

Advertisement

CMer Error Code 2
Table-D2 sorts the contents of CMer error code 2 errors.
Displayed here is a further classification of the operation of CMer error code 1.
□□
00
This error code is conforms to the upper "CMer Error Code 1".
20
An error occurring during ejection of the cartridge from the drive.
30
An error occurring during loading of the cartridge to the drive.
40
An error occurring during transporter P drive system initialization-error restoration.
50
An error occurring during ejection of the cartridge from the magazine slot.
60
An error occurring during loading of the cartridge to the magazine slot.
70
An error occurring during transporter Y move.
80
An error occurring during inventory check of the cartridges.
81
An error occurring during reading the bar code label.
9X
An error occurring during accessing the drive.
CMer Error Code 3
These error codes show an essential factor of CMer error.See Capter6(code with cause
and
Recovery Procedure)
D.err
The displayed error codes are 4 digits and configured as described below.
Examples of error code displays :
Table-D4 sorts the D.err error codes and their contents.
○○○○
0101
The Autoloader detected timeout error on the communication with the drive.
0110
The Autoloader detected parity error on the communication with the drive.
0111
The Autoloader detected framing error on the communication with the drive.
0112
The Autoloader detected overrun error on the communication with the drive.
0140
The Autoloader detected an error on the Load/Unload command.
0170
The Autoloader detected an error on the communication with the drive.
0180
The Autoloader detected an error on the communication with the drive.(NAK retry over)
0181
The Autoloader detected an error on the communication with the drive.(SNAK retry over)
0102∼010F,
The
0113∼013F
Load/Unload/Unthread command.
0190
The Autoloader detected timeout error before issuing Unload command.
0191
The Autoloader detected timeout error before finishing Unload command.
0192
The Autoloader detected state error on the communication with the drive .
Table-D2 CMer Error Code 2 Table
.
Table-D4
D.err Error Code Table
Autoloader
detected
cartridge
Description
D.err ○○○○
Description
position
or
timeout
- 65 -
error
before
issuing

Advertisement

Table of Contents
loading

Table of Contents