Tandberg Data Autoloader Tandberg LTO2 Installation And User Manual page 82

Err.
The displayed error codes are 4 digits and configured as described below.
Example of error code display : Err. ××××
Table-D5 sorts the Err error codes and their contents.
××××
0101
The Autoloader detected timeout error on communication with the drive.
0110
The Autoloader detected parity error on communication with the drive.
0111
The Autoloader detected framing error on communication with the drive.
0112
The Autoloader detected overrun error on communication with the drive.
0140
The Autoloader detected an error on the Load/Unload command.
0170
The Autoloader detected an error on the communication with the drive.
0180
The Autoloader detected an error on the communication with the drive.(NAK retry over)
0181
The Autoloader detected an error on the communication with the drive.(SNAK retry over)
0102∼010F,
The
0113∼013F
Load/Unload/Unthread command.
0190
The Autoloader detected timeout error before issuing Unload command.
0191
The Autoloader detected timeout error before finishing Unload command.
0192
The Autoloader detected state error on communication with the drive.
4005∼4007
The Autoloader detected an error during Eject from slot.
4008∼400A
The Autoloader detected an error during Load to slot.
4011
Operating mistake.
4051∼4053
The Autoloader detected an error during self- test(maintenace mode).
Table-D5 Err Error Code Table
Autoloader detected cartridge
Description
position or timeout
- 66 -
error before issuing