Tandberg Data Autoloader Tandberg LTO2 Installation And User Manual page 39

Operation Examples
The operation procedure and LCD indications are described below when loading the cartridge
housed in slot 7 into the drive.
Operation 1
Operation 2
Operation 3
Operation 4
Operation 5
Operation 6
Operation 7
Switch ON the power and wait for the completion of the power-on test.
Display: "READY" and "DRV empty" are alternately displayed.
Press the ENTER key.
Display: STATUS
Press the arrow key and select the "LOAD" command.
Display: LOAD
Press the ENTER key and define the command.
Display: Load Drv?
Press the ENTER key and define the command.
Display: Frm Slt 1?
Press the arrow key and select "Slt 7".
Display: Frm Slt 7?
Press the ENTER key and execute the command.
Display: Complete (when the command ends normally.)
Err. xxxxxx (when an error occurs. xxxxxx is the error code.)
- 23 -