Tandberg Data Autoloader Tandberg LTO2 Installation And User Manual page 54

5.1.1.1 Manually Cleaning of the Drive Head
Operation 1
Operation 2
Operation 3
Operation 4
Operation 5
Operation 6
Operation 6
Operation 7
Operation 8
Load the cleaning cartridge supplied with the main unit into any of the
slots. The cleaning cartridge is housed in slot number 5 in this example.
Use the panel keys to load the cleaning cartridge into the drive.
(Cleaning will start automatically.)
Display: cleaning (Displayed during cleaning.)
When cleaning is completed, "DRV full" is displayed.
Display: DRV full
Press the ENTER key.
Display: STATUS
Press the arrow key and select the "EJECT" command.
Display: EJECT
Press the ENTER key and define the "EJECT" command.
Display: Eject Drv?
Press the ENTER key and define the command.
Display: To Slot 1?
Press the arrow key and select "To Slot 5?".
Display: To Slot 5?
Press the ENTER key and select the command.
Display: Complete (when the command ends normally.)
Err. xxxxxx (when an error occurs. xxxxxx is the error code.)
- 38 -