Table of Contents
Advertisement
Operating Instruction STERIclave B 2200 / 2200 P
|
6 Operation
6.10 Changing the water
6.10 Changing the water
6.10.1 Emptying the foul water tank
Requirement
The H
O max. LED will light up if there is too much water in the used water tank.
2
See also: 7.4 Regular total cleaning, Page 61
▶ Place a container with a capacity of at least 2.6 litres in front of the STERIclave
B.
▶ Put one end of the drain hose into the container and connect the other to the
quick connection to drain the foul water tank.
The foul water flows into the container.
▶ Disconnect the drain hose from the quick connection to drain the foul water (to
do this, press down on the nut and pull the hose off the quick connection).
54/78
Advertisement
Table of Contents
