Operating Instruction STERIclave B 2200 / 2200 P
|
4 Installation
4.5 Settings
4.5.3 Setting the language or making settings for recording cycle data
Note
Either a language for the pressure report or recording of cycle data (for service
engineers only) can be set. The default printer language is 5 (German).
▶ Press and hold down 2 until the required language or recording of cycle data is
selected.
"L1", "L2", "L3","L4","L5" or "L6" will appear on the display.
Display
L1
L2
L3
L4
L5
L6
▶ Press the Set button to access the pressure unit setting.
4.5.4 Setting the pressure unit
▶ Press 1 until the required pressure unit is selected.
"SET UNIT BAR" or "SET UNIT PSI" will appear on the display.
▶ Press the Set button to revert to operation.
Language for the pressure report
Italian
English
Spanish
French
German
Recording cycle data (for service engineers only)
32/78