Interrupting A Program - KaVo STERIclave B 2200 Operating Instruction

Operating Instruction STERIclave B 2200 / 2200 P
|
6 Operation

6.8 Interrupting a program

6.8 Interrupting a program
In the event of errors during program execution, the red Alarm LED will light up and
the error code will appear on the left-hand display.
See also: 8 Troubleshooting, Page 65
▶ Press the Start/Stop button to interrupt the active sterilisation process.
"MANU STOP" will appear.
▶ Make sure that the pressure indicated on the display is zero.
▶ Open the door.
▶ Remove the instruments.
▶ Check for moisture inside the chamber.
▶ Close the door and wait for 10 minutes to allow the water to evaporate.
or
▶ Use a cloth to dry the chamber.
52/78