Operating Instruction STERIclave B 2200 / 2200 P
|
8 Troubleshooting
8.4 Class B error messages
Malfunction
Error code 18 during drying
Error code 31 during drying
8.4 Class B error messages
The error messages listed in the table below are only relevant for the Sterilize1,
Sterilize 2, Special S1, Special S2 and Special S3 programs.
Cause
Drying phase interrupted.
Low air pressure is not sufficient.
Remedy
▶ Allow the instruments to dry.
▶ Avoid excess loads.
68/78