Changing The Gripping Yoke - KaVo Everest engine Base Camp 4140 Assembly Instructions Manual

Assembly instructions Everest
7 Calibrate the Everest engine Base Camp 4140
engine Base Camp 4140
®

7.2.3 Changing the gripping yoke

▶ In the program Everest Base Camp Control in the menu Machine, select the
submenu Gripping yoke replacement.
▶ Press the function keyStart on the control panel.
The gripping yoke tilts so that it can be changed easily. An appropriate message
appears on the screen.
▶ Open the door of the milling/grinding unit.
▶ Undo the gripping yoke on both sides with a 6 mm Allen key.
▶ Pull out the gripping yoke.
|
7.2 Mill the calibration body
30/51