Documenting The Sterilisation Process; Using The Internal Printer To Document The Sterilisation Process - KaVo STERIclave B 2200 Operating Instruction

Operating Instruction STERIclave B 2200 / 2200 P
|
6 Operation

6.9 Documenting the sterilisation process

6.9 Documenting the sterilisation process

6.9.1 Using the internal printer to document the sterilisation process

Note
Only the STERIclave B 2200 P features an internal printer.
① LED
② Paper roll
The internal printer will print the most important parameters to paper automatically
at the start of each new sterilisation cycle.
The printout will contain the following information:
▪ Unit serial number
▪ Sterilisation date
▪ Selected sterilisation program
▪ Sterilisation temperature and time
▪ Cycle number (ascending order)
▪ Sterilisation start time
▪ Start time of first vacuum phase
▪ Start time of second vacuum phase
▪ Start time of third vacuum phase
▪ Start time of sterilisation phase
▪ End time of sterilisation phase
▪ Start time of drying process
▪ Time ended
You can use the Feed button to roll the paper manually.
▶ Tear off the printout before opening the door and document it.
③ Flap
53/78